SeaHawk Refits

Page updated 14 April 2009

There are two refits shown in this section. The first shows the conversion of a two-berth boat to a four-berth and the second the fitting of an additional child berth in a two-berth boat.

The main images, which can be accessed via the thumbnails below, are best viewed in order, as some of the commentary assumes knowlede of the comments about the earlier pictures in the sequence.

Go to TopFour Berth Conversion

This is Bantam's Drift under conversion from a two to four berth boat.

The cabin with Galley Unit about to be removed The Original Matting still on the Hull sidesThe Cabin is stripped out  Last of the Matting is Gone

New Framing goes in Bunk Support cut away to allow for Cooker Controls New V-Berth Cushions in Place A Radio has also been fitted

The New Cooker New Keel Plate retains the old Number Dressed with New Scatter Cushions Forward Berths overhang the Bilge Cover

When sold the new owner did further work on the boat. Some of that can be seen on the page concerning Mast Bracing.

Go to TopAdditional Child Berth

This is Pippin having a child berth installed over the space where originally a sea toilet was fitted.

Rebuilding the framing Strengthened berth completed The Galley is unchanged The Finished Child Berth with new cushion

Go to Top